Articulating boom lifts in the 80 to 85 foot class are designed for up-and-over access around obstacles on large, complex sites. Their multi-joint booms allow frequent, precise adjustments at height, making them a good fit for outdoor work that demands careful positioning, including maintenance at facilities like power stations or industrial plants. In this range, platform heights are about 80–85 feet with working heights typically in the high-80s to low-90s. Horizontal outreach generally lands in the mid-50s to around 60 feet, and platform capacity is commonly near 500 pounds for two workers and tools. These internal-combustion units are set up for rough terrain with four-wheel drive and steer to help position safely on uneven ground.

The 135’ IC articulating boom lift is built for challenging jobsites and extreme height work. It runs on an internal-combustion powertrain for outdoor use and uses an articulating boom for precise, up-and-over positioning around obstacles. Four-wheel drive and steer support maneuverability on rough terrain, and continuous rotation helps you line up the platform quickly. In this class, platform heights are around 135 feet with working heights typically in the high-130s to low-140s. Horizontal outreach commonly falls in the high-60-foot range, and platform capacities often land between 500 and 600 pounds for two workers and tools. Models include: Genie Z-135/70. Rent a 135-ft IC articulating boom lift from an EquipmentShare location near you.

Articulating boom lifts in the 40 to 45 foot class are designed for up-and-over access around obstacles in tight layouts. Their multi-joint booms let operators make continual, precise adjustments, which is useful for utility repair, facility maintenance, and construction work in awkward or congested areas. Internal-combustion power with rough-terrain drive helps on uneven outdoor sites.

Articulating boom lifts in the 30 to 35 foot class are built for up-and-over access in tight layouts where obstacles block a straight approach. Their multi-joint design allows frequent repositioning and precise placement, making them a good fit for utility maintenance, light construction, and repair work in constrained outdoor areas. In this range, platform heights are about 30–35 feet with working heights roughly 36–41 feet. Horizontal outreach commonly falls around 19–22 feet, and platform capacity is typically near 500 pounds.

Articulating boom lifts in the 60 to 65 foot class are built for up-and-over access in large, complex layouts. Their multi-joint booms let operators make continual, precise adjustments around obstacles, which is useful in settings like aircraft hangars, plants, and congested outdoor sites. In this range, platform heights are about 60–65 feet with working heights typically in the high-60s to low-70s. Horizontal outreach commonly falls in the mid-30s to low-40s feet, and platform capacity is often around 500 pounds. These internal-combustion units are set up for rough terrain with four-wheel drive and steer to position confidently on uneven ground.

Articulating boom lifts in the 125-foot class are built for outdoor work that needs up-and-over reach around obstacles. Platform heights are around 125 feet with working heights typically in the low 130s, and horizontal outreach commonly falls in the 60-foot range. Platform capacities are often between 500 and 1,000 pounds to handle two workers and tools. These internal-combustion units run on diesel and are set up for rough terrain with four-wheel drive and steer for positioning on uneven ground. Continuous turntable rotation and platform rotation are commonly included to fine-tune your approach at height. Models include: JLG 1250AJP.

Hybrid articulating boom lifts in the 60 to 65 foot class combine battery power with an onboard engine for flexible, low-emission operation. They're built for up-and-over work around obstacles on mixed indoor/outdoor jobs, with rough-terrain drive for positioning outside and quiet electric mode for work in enclosed areas. Platform heights are typically around 60–65 feet, with working heights in the high-60s, horizontal outreach in the mid-30s, and platform capacities commonly between 500 and 600 pounds.

Atrium (spider) lifts in the 70 to 80 foot class are built for access in tight, hard-to-reach areas. Stowed widths typically fit through standard double doors, and the tracked undercarriage provides low ground pressure for travel across finished floors. Outriggers level the machine for safe setup on uneven surfaces in lobbies, atriums, and other confined spaces. In this range, platform heights are about 70–80 feet with working heights generally in the high-70s to mid-80s, and horizontal outreach commonly in the low-30s to around 40 feet. Platform capacities often fall between 400 and 500 pounds. Many units run electric or bi-energy power for indoor use with the option to operate outdoors when needed.

Atrium (spider) lifts in the 60 to 65 foot class are built for access in tight, hard-to-reach areas. Stowed widths typically fit through standard double doors, and the tracked undercarriage provides low ground pressure and non-marking travel on finished floors. Outriggers level the machine on uneven surfaces for safe setup in lobbies, atriums, and other confined spaces. In this range, platform heights are about 60–65 feet with working heights generally in the high-60s, and horizontal outreach commonly around the mid-20s to low-30s feet. Many units run on electric or bi-energy power for indoor work with the option to operate outdoors when needed.

Skip loaders in the 60 to 85 horsepower range are ideal for compact site work, landscaping, and material transport. These machines are built for precision grading, backfilling, and loading tasks that require a smaller footprint and smooth maneuverability on finished surfaces. Most models in this class feature a front loader bucket and rear grading box, making them well-suited for tasks like curb prep, fine grading, and light material handling. Arrowhead offers skip loaders like the John Deere 210G-EP, John Deere 210LEP, and CASE 570N EP.

Backhoe loaders in the 68 to 74 horsepower range are compact and capable machines built for smaller-scale construction, utility work, and light excavation. With a standard stick configuration, these units are well-suited for trenching, digging, and backfilling tasks where space is limited but versatility is still essential. Typical digging depths for this class reach up to 14 feet, with strong front loader capabilities for moving materials like dirt, gravel, and debris. Their wheeled design makes them easy to transport between jobs and allows for smooth operation across slopes and uneven surfaces. Arrowhead provide reliable models like the John Deere 310LEP, JCB 3CX-14, and CASE 580N EP.

Backhoe loaders in the 68 to 74 horsepower range with extendable sticks are compact, multipurpose machines built for smaller excavation, utility, and material-handling tasks. These units combine the capabilities of a loader and an excavator, making them a practical choice for job sites that require versatility in tight working areas. With an extendable stick, these machines typically reach digging depths up to 17 feet, giving operators more reach than standard stick models. Their wheeled design allows for smooth travel across uneven terrain, while the front loader makes quick work of transporting and backfilling loose material. We provide machines in this class for jobs where compact power and extra reach are both essential.

Backhoe loaders in the 110 to 115 horsepower range with extendable sticks are built for versatility on active job sites. These machines combine the functionality of a loader and an excavator, making them a practical choice for trenching, excavation, utility work, and material handling. With digging depths typically reaching up to 19 feet when fully extended and breakout forces strong enough to handle compacted soil and debris, this class delivers solid performance for a wide range of tasks. The loader bucket on the front adds even more functionality for backfilling, loading, and grading. Arrowhead offers models like the John Deere 410L with extendable stick.

Backhoe loaders in the 110 to 115 horsepower range with a standard stick are ideal for general-purpose excavation, trenching, and material handling. These machines combine the functions of a loader and an excavator, making them a practical choice for job sites that require flexibility without switching between machines. Standard stick configurations typically offer digging depths up to 17 feet, with strong breakout force for handling compacted soil and heavy materials. The front loader bucket provides additional functionality for backfilling, grading, and moving loose material. EquipmentShare offers models in this class suited for utility work, site prep, and light demolition.

Backhoe loaders in the 90 to 99 horsepower range with extendable sticks are built for mid-sized excavation, trenching, and utility work that requires added reach and digging depth. These machines are ideal for job sites that need both a strong loader and a capable rear excavator without bringing in multiple pieces of equipment. With an extendable stick, this class typically offers digging depths up to 17 feet, along with strong front loader lift capacity for moving soil, rock, or debris. The wheeled design allows for fast repositioning across active sites, while the engine output provides the power needed for consistent performance in tough conditions.

Backhoe loaders in the 90 to 99 horsepower range with standard sticks are a solid choice for mid-sized construction, utility, and excavation projects. These machines deliver reliable digging force and strong loader lift capacity while keeping the configuration simple and easy to operate. Standard stick models typically offer digging depths up to 14 feet, making them ideal for trenching, backfilling, and general material handling. With a balanced design and smooth controls, this class is well-suited for jobs that require versatility across changing terrain.

Rent a versatile Carry Deck Crane 18,000lbs Diesel from EquipmentShare for your lifting needs. This powerful crane offers exceptional reach and capacity. Ideal for confined spaces and various construction applications, it combines maneuverability with robust lifting power. Perfect for steel erection, maintenance, and industrial projects where traditional cranes can't access.

Track skid loaders in the 2,000 to 2,300 lb ROC class are ideal for earthmoving, landscaping and general construction tasks. These machines offer a strong combination of lifting power and mobility, especially on uneven or soft ground. Models in this range typically deliver between 65 and 74 horsepower and are compact enough to operate comfortably on tighter job sites. Arrowhead offers dependable options like the Kubota SVL65-2, Bobcat T62 and Takeuchi TL8.

Track skid loaders in the 4,100 to 4,500 lb ROC class are built for the most demanding jobs. These machines are ideal for heavy lifting, large-scale site prep, and material handling where maximum power and stability are required. With rated operating capacities exceeding 4,000 lbs and horsepower typically over 100, this class delivers unmatched strength while maintaining a compact footprint for tight or sensitive areas. EquipmentShare offers models like the CASE TV620B, known for its high breakout force and excellent traction across soft or uneven ground.

Track skid loaders in the 3,600 to 4,000 lb ROC class are built for high-capacity lifting and tough terrain. These machines are ideal for large-scale construction, heavy material handling and site prep where consistent power is crucial. With lifting capacities up to 4,000 lbs and engines often producing over 100 horsepower, this class offers strong breakout force and smooth operation in mud, sand or soft ground. Their track systems provide excellent traction and stability without sacrificing maneuverability on busy job sites.

Track skid loaders in the 1,700 to 1,900 lb rated operating capacity range are a solid choice for light construction, landscaping and material handling. Compact and easy to maneuver, these machines are built to perform in tight spaces and on rough or soft terrain. Most models in this class run between 50 and 74 horsepower and can lift nearly a ton of material. Arrowhead offers reliable machines like the Takeuchi TL6 and the CASE TR270B, both known for their job site versatility.

Track skid loaders in the 2,500 to 2,800 lb ROC class are built for heavy-duty work. These large-frame machines are ideal for grading, material handling and other demanding construction tasks that require extra lifting power and stability. With over 70 horsepower and a strong vertical lift design, this class offers more muscle without sacrificing control. EquipmentShare offers models like the Takeuchi TL10V2-CR, which offers the versatility to run a wide range of attachments.

Track skid loaders in the 3,100 to 3,400 lb ROC class offer serious lifting capacity and performance for heavy-duty applications. These machines are well-suited for site prep, material handling and large-scale construction jobs where power and stability are essential. With rated operating capacities over 3,000 lbs and engine outputs around 74 to 100 horsepower, this class is designed to handle tough terrain while keeping operators productive. Arrowhead offers proven models like the John Deere 331G, Bobcat T740 and Bobcat T76, each built for durability and attachment versatility across demanding jobs. If your project involves moving heavy loads, working in soft ground or operating long hours on active sites, this class has the muscle to keep up. Rent a 3,100–3,400 lb ROC track skid loader from an EquipmentShare location near you.

Track dozers in the 45,000 to 55,000 lb class are built for heavy-duty grading, land clearing, and large-scale earthmoving work. With powerful drive systems and high-capacity blades, these machines are ideal for cutting through dense soil, pushing heavy material, and maintaining consistent performance across rough terrain. Most models in this range deliver between 215 and 235 horsepower and feature straight or semi-U blades with capacities typically ranging from 5 to 7 cubic yards. Their wide tracks offer excellent flotation and stability in demanding conditions, whether you’re working on a construction site, in a quarry, or across farmland. These dozers help reduce manual labor hours and increase productivity by moving large volumes of material quickly and efficiently.

Track dozers in the 16,000 to 18,000 lb class are compact, versatile machines built for light-to-mid-duty earthmoving, grading, and site prep. Their smaller footprint and lighter operating weight make them ideal for residential construction, landscaping work, and tight job sites where maneuverability matters. Machines in this range typically deliver between 65 and 80 horsepower and come equipped with 6-way PAT (Power-Angle-Tilt) blades for precision grading and backfilling. Despite their size, they offer the pushing power and control needed to move soil, clear debris, or maintain job site access roads. EquipmentShare rents models like the John Deere 450K and CASE 650M, both built with reliability in mind.

Track dozers in the 22,000 lb class are built for heavy-duty grading, earthmoving, and job site preparation. These machines offer a strong mix of power and control, making them ideal for clearing land, building pads, and shaping slopes where consistent performance is critical. With operating horsepower typically between 100 and 115, this class delivers solid pushing force and responsiveness in a mid-sized frame. Most models are equipped with 6-way PAT blades, allowing operators to angle, tilt, and backfill with precision. Arrowhead rents dependable machines like the John Deere 650K, known for excellent traction on soft or uneven ground.

Track dozers in the 30,000 to 32,000 lb class are built for tough site prep, grading, and earthmoving work where traction, blade control, and reliability matter. These machines are a great fit for clearing large areas, leveling pads, and pushing heavy material across uneven terrain. With horsepower typically between 125 and 135, this class delivers solid pushing power while maintaining maneuverability. Most models feature 6-way PAT blades for precise grading and contour work, making them versatile tools for a wide range of construction applications. EquipmentShare rents durable machines like the John Deere 700L, designed for strong performance and operator comfort in all site conditions.

Track dozers in the 20,000 lb class are built for versatile performance on mid-sized construction, grading, and site prep projects. With more pushing power than smaller units and a compact enough footprint for maneuverability, they strike a strong balance between productivity and control. These machines typically deliver between 85 and 95 horsepower and come equipped with 6-way PAT blades, making them ideal for fine grading, backfilling, and light earthmoving across varying terrain. Their track systems provide consistent traction and stability on soft, uneven, or sloped ground. EquipmentShare offers dependable models like the John Deere 550K and CASE 750M.

Electric mini skid steers in the 700 to 900 lb rated operating capacity range are built for light-duty performance in confined areas. These compact, battery-powered machines are ideal for landscaping, interior work, and material handling tasks where low noise and zero emissions are required. Most models in this class offer around 700 to 900 lb of lifting capacity with enough hydraulic power for attachments like buckets, augers, and trenchers. Their lightweight design and narrow width make them easy to maneuver through gates, alleys, and indoor spaces without sacrificing productivity. Arrowhead offers electric mini skid steers that deliver clean, quiet performance for projects in noise-sensitive or enclosed environments.

Electric articulating boom lifts in the 30 to 34 foot class are built for precise, up-and-over access indoors. Their multi-joint booms make frequent repositioning easy around ducts, conveyors, or mezzanines, and the electric powertrain supports zero-emission, low-noise work in occupied spaces. In this range, platform heights are about 30–34 feet with working heights roughly in the mid- to high-30s, horizontal outreach commonly in the high-teens to low-20s feet, and platform capacities often around 500 pounds. Compact dimensions and non-marking tires help in aisles and finished areas. EquipmentShare offers models like the JLG E300AJP.

All-terrain dumpers are designed to move heavy loads across rough, uneven ground where standard dump trucks can’t operate effectively. These machines are ideal for construction, earthmoving and landscaping jobs that require reliable material transport in off-road or soft terrain conditions. With compact frames and high ground clearance, all-terrain dumpers can access hard-to-reach areas while carrying materials like dirt, gravel, debris or aggregate. Their articulated steering and low center of gravity provide stability on slopes and uneven surfaces.

Mini excavators in the 5,000 to 6,500 lb. class are a great fit for projects that demand both precision and digging power in tighter workspaces. These machines are ideal for trenching, site prep, light utility work and other small-scale jobs where mobility and maneuverability are key. This class of mini excavators typically delivers digging depths of 8 to 10 feet and runs on engines producing 20 to 25 horsepower. We can provide models like the Bobcat E26 and the SANY SY26, both known for their smooth controls and compact footprint. Rubber tracks and zero- or reduced-tail-swing designs help operators work confidently near structures or within narrow zones. Whether you're cutting trenches or working around obstacles, these compact excavators are built to get the job done with minimal disruption. Rent a 5,000–6,500 lb.

Mini excavators in the 4,000 to 4,900 lb. electric class deliver the performance you expect with the added benefit of zero emissions and ultra-quiet operation. These machines are ideal for indoor jobs, utility work and urban construction sites where environmental restrictions and noise limits are a concern. Powered by lithium-ion batteries, these models typically provide 4 to 8 hours of continuous runtime and offer digging capabilities comparable to similar diesel machines. Arrowhead offers models like the Takeuchi TB20e, known for its compact design and low operating impact. If you're working indoors or in areas with strict emissions rules, this electric mini excavator class is built to keep you productive. Rent a 4,000–4,900 lb.

Mini excavators in the 7,000 to 9,000 lb. class strike a strong balance between power and portability, making them a reliable choice for a wide range of mid-sized projects. These machines are ideal for trenching, utility work and foundational excavation. Typical models in this class of mini excavators offer digging depths of 9 to 11 feet and are powered by engines producing 24 to 35 horsepower. EquipmentShare offers dependable options like the Bobcat E35, SANY SY35, and SANY SY35U, each built for productivity and smooth operation in demanding site conditions. Their compact design and reduced tail swing make them easy to maneuver near structures.

A mini excavator is a smart move for small to mid-sized jobs that still require serious digging power. Models in the 10,000 to 14,000 lb. class are well-suited for tasks like trenching, foundation prep and digging alongside structures without causing disruption. Their compact frames allow them to maneuver easily in tight spaces, making them ideal for residential and light commercial work. EquipmentShare offers popular models like the Bobcat E50 and the Takeuchi TB250-2CR, both known for their durability and versatility on job sites. Compact excavator models in this range typically have a max depth of 11 to 14 feet and are powered by a 35 to 50 horsepower engine. So whether you're uncovering pipelines, digging out support areas or clearing space for new foundations, this class of mini excavators can handle it. Rent an 10,000-14,000 lb.

Renting mini excavators is a smart move for small to mid-sized jobs that still require serious digging power. Models in the 10,000 to 14,000 lb. class are well-suited for tasks like trenching, foundation prep and digging alongside structures without causing disruption. Their compact frames allow them to maneuver easily in tight spaces, making them ideal for residential and light commercial work. Compact excavator models in this range typically have a max depth of 11 to 14 feet and are powered by a 35 to 50 horsepower engine.

Mini excavators in the 15,000 to 20,000 lb. class offer the ideal combination of power, precision and mobility for more demanding jobsites. These models are a great fit for construction, utility and landscaping projects where stronger breakout force and deeper digging capacity are needed. With digging depths typically ranging from 13 to 15 feet and engine outputs between 65 and 70 horsepower, these machines deliver performance in a compact footprint. Arrowhead offers models like the Bobcat E88, SANY SY95C and Takeuchi TB290, all known for their versatility across a wide range of applications. Whether you're trenching, grading or handling site prep, this class of mini excavator is built to take it on

For jobs that demand extreme precision and access in the tightest spaces, mini excavators in the 2,500 to 4,000 lb. class are the go-to solution. These ultra-compact machines are ideal for indoor demolition, landscaping, utility installs and small residential projects where space is limited and surface impact needs to be minimal. Despite their size, these mini compact excavator models offer impressive capability, with max digging depths around 5 to 7 feet and engines delivering 10 to 20 horsepower. EquipmentShare offers models in this class like the Bobcat E10 and the Takeuchi TB210R. When tight access meets tough digging, this class of mini excavators gets the job done. Rent a 2,500–4,000 lb.

Ride-on mini skid steers in the 800 to 1,100 lb rated operating capacity range are compact, fast, and built for efficiency on smaller job sites. These machines are ideal for light construction, landscaping, material handling, and quick cleanup tasks where space is tight and speed matters. Unlike enclosed models, ride-on skid steers feature an open platform at the rear, allowing operators to hop on and off easily while maintaining full control. Most models in this range deliver between 800 and 1,100 lbs of lifting capacity and are compatible with a variety of attachments for trenching, digging, or grading.

This High Reach Telehandler class is available for rent at EquipmentShare boasts a 10,000 lbs lift capacity and an impressive 75-foot reach. Ideal for construction and heavy-load logistics, this telehandler excels in outdoor and rough terrain operations, making it perfect for moving materials to elevated work areas with ease and efficiency. Rent one today!

Track excavators in the 25,000 to 35,000 lb class are a reliable choice for general excavation, trenching, and site prep work. These machines are well-suited for a mix of terrain, including soft ground and sloped surfaces, where stability and traction are essential. The track system offers low ground pressure and better flotation than wheeled alternatives, making this class ideal for both urban jobs and rougher outdoor sites. Typical models in this range deliver digging depths around 18 to 20 feet, with horsepower generally falling between 90 and 120. Bucket capacities often range from 0.7 to 1.2 cubic yards, giving these machines a good balance of breakout force and efficiency for mid-sized projects. Arrowhead offers models like the SANY SY135C, along with other options that provide consistent performance and operator-friendly controls.

Track excavators in the 66,000 to 75,000 lb class are designed for large-scale earthmoving, deep trenching, and heavy material handling. These machines are ideal for site prep, road building, and utility work where consistent power and deep digging capability are required. Their weight and track-driven stability make them well-suited for uneven terrain and high-production environments. Typical models in this class deliver digging depths in the 23 to 25 foot range, with horsepower generally between 200 and 240. Bucket capacities often fall between 1.5 and 2.1 cubic yards, offering the strength and efficiency needed for demanding excavation tasks.

Track excavators in the 25,000 to 35,000 lb range with reduced tailswing are built for tight job sites where space is limited but performance can’t be compromised. These machines are ideal for utility work, road repair, and urban construction where traditional excavators would be difficult to maneuver. Reduced tailswing designs allow operators to work confidently near walls, buildings, and traffic zones without sacrificing digging power. Machines in this class typically offer digging depths in the 18 to 20 foot range, with horsepower between 90 and 120 and bucket capacities around 0.7 to 1.2 cubic yards. The track system provides solid stability on soft or uneven ground, making these excavators just as capable in rough terrain as they are in confined spaces.

Track excavators in the 110,000 to 120,000 lb class are designed for large-scale digging, heavy lifting, and deep trenching on demanding job sites. These machines are commonly used in commercial earthmoving, mining, and infrastructure work where maximum performance is required. Models in this range typically offer digging depths approaching 25 feet, with breakout forces that exceed 55,000 pounds and bucket capacities that often range between 2 and 4 cubic yards. Horsepower generally falls between 360 and 395, giving these excavators the power needed for high-volume production tasks.

Track excavators in the 37,000 to 42,000 lb class are well-suited for mid-sized construction, utility work, and large-scale landscaping projects. These machines strike a strong balance between digging force and maneuverability, making them a reliable choice for trenching, material handling, and general site development. Machines in this range typically offer digging depths of around 20 to 22 feet, with horsepower ranging from 120 to 150 and bucket capacities between 1.0 and 1.5 cubic yards. Their operating weight provides the stability needed for more demanding jobs, while still allowing for transport and setup on tighter sites.

Track excavators in the 56,000 to 65,000 lb class are built for heavy-duty trenching, mass excavation, and material handling across rugged, uneven terrain. Their low center of gravity and track-driven design provide excellent traction and stability on soft, hilly, or off-road surfaces. These machines are a reliable choice for jobs that demand strong breakout force and deeper digging than wheel excavators typically offer. Most models in this class offer digging depths in the range of 22 to 24 feet, with horsepower between 170 and 210 and bucket capacities typically between 1.2 and 1.8 cubic yards.

Track excavators in the 45,000 to 55,000 lb class are built for high-production jobs where speed, power, and reliability matter. These machines are commonly used for trenching, mass excavation, and heavy debris removal on large construction and infrastructure sites. Their track systems provide excellent traction and flotation across soft, uneven, or unstable ground. Typical models in this class offer digging depths around 21 to 23 feet, with horsepower ranging from 150 to 175 and bucket capacities in the 1.3 to 1.8 cubic yard range. They’re well-suited for transporting heavy materials, breaking through dense soil, and handling larger attachments with ease.

Track excavators in the 77,000 to 85,000 lb class are built for heavy digging, high-volume material handling, and consistent performance across challenging terrain. These machines are ideal for large-scale construction, infrastructure work, and utility excavation where both power and stability are essential. Models in this range typically offer digging depths of up to 25 feet, with horsepower between 250 and 275 and bucket capacities that often range from 1.8 to 2.4 cubic yards. Some configurations are available with hydraulic thumbs for improved material handling and versatility on the job.

Long reach track excavators in the 56,000 to 65,000 lb class are designed for jobs that require extended digging depth and precision at a distance. These machines are ideal for deep trenching, drainage work, and excavation around water, slopes, or difficult-to-access areas. Their extended boom and stick configurations allow for a longer working range without sacrificing stability or control. Typical models in this class can reach digging depths beyond 30 feet, depending on configuration, with horsepower generally between 170 and 210. The track system provides the same benefits as standard models, offering reliable traction on soft, uneven, or steep ground. EquipmentShare offers long reach machines in this weight range that are suited for specialized tasks where standard excavators can’t reach.

Track excavators in the 25,000 to 35,000 lb class are a reliable choice for general excavation, trenching, and site prep work. These machines are well-suited for a mix of terrain, including soft ground and sloped surfaces, where stability and traction are essential. The track system offers low ground pressure and better flotation than wheeled alternatives, making this class ideal for both urban jobs and rougher outdoor sites. Typical models in this range deliver digging depths around 18 to 20 feet, with horsepower generally falling between 90 and 120. Bucket capacities often range from 0.7 to 1.2 cubic yards, giving these machines a good balance of breakout force and efficiency for mid-sized projects. EquipmentShare offers models like the SANY SY135C, along with other options that provide consistent performance and operator-friendly controls.

Tracked walk-behind trenchers are compact, high-performance machines designed for digging narrow trenches in tight or confined spaces. These units are commonly used for installing irrigation systems, utility lines and landscape edging where maneuverability and precision are critical. Most models in this class offer digging depths between 24 and 36 inches, with chain widths ranging from 4 to 6 inches, making them well-suited for shallow trenching across residential or light commercial job sites. The tracked undercarriage provides stability on soft, uneven or sloped terrain while reducing ground disruption. Their narrow profile and intuitive controls make it easy to work alongside fences, sidewalks or other structures with minimal risk of damage.

Ride-on trenchers in the 45 to 50 horsepower range are built for medium to heavy-duty trenching tasks on construction and utility jobs. These machines are ideal for digging trenches for water lines, electrical conduit, drainage systems and other underground installations. With deeper digging capabilities and greater stability than walk-behind models, ride-on trenchers offer enhanced control and productivity, especially on longer trench runs or in tougher soil conditions.

Wheeled walk-behind trenchers are compact machines designed for quick and efficient trenching across residential and light commercial sites. These units are ideal for landscaping, irrigation, cable or utility installs and other shallow trenching needs where precision and portability matter. Most models in this class offer digging depths up to 24 inches with chain widths between 4 and 6 inches. The wheeled design makes them easy to transport and maneuver across turf or paved surfaces, while still delivering consistent trenching performance. Adjustable depth controls and durable cutting chains allow for smooth operation in a variety of soil conditions. EquipmentShare rents dependable models like the 1010K and F-991H.

Vacuum excavators in the 500 to 600 CFM range offer a safer, more controlled alternative to traditional digging methods. These diesel-powered units use high-velocity airflow to remove soil and debris around buried utilities without damaging underground infrastructure like pipes or cables. This class is ideal for tasks like potholing, utility locating, and daylighting where precision is critical and access may be limited. Compact yet powerful, these machines are well-suited for both urban and remote job sites.

Diesel-powered vacuum excavators with 1,000 CFM suction capacity are built for safe, non-destructive digging in sensitive areas. These machines use high-powered airflow to remove soil, debris, and materials from around buried utilities without risking damage to pipes, cables, or other underground infrastructure. This class of vacuum excavator is ideal for daylighting, utility locating, potholing and cleanup tasks on construction and industrial job sites. With strong suction and tank capacity, they offer efficient performance on larger projects that require controlled excavation.

Wheel loaders in the 190 to 200 horsepower range with 4 cubic yard buckets are designed for moving high volumes of material quickly across large jobsites. These machines are commonly used in roadwork, demolition, utility projects, and bulk material handling where fast loading and hauling are critical. This class offers strong breakout force and fast cycle times for scooping, lifting, and transporting loose materials like sand, rock, and debris.

Wheel loaders in the 230 to 255 horsepower range with 4 cubic yard buckets are built for high-production material handling on large job sites. These machines are commonly used in construction, mining, aggregate yards, and other heavy-duty environments that demand consistent output and fast loading cycles.

Wheel loaders in the 145 to 155 horsepower range with 3 cubic yard buckets are built to handle high-volume material movement quickly and efficiently. These machines are ideal for construction, agriculture, and industrial jobs that require consistent loading, hauling, or stockpiling of loose materials like gravel, sand, dirt, or mulch. With four-wheel drive and articulated steering, wheel loaders in this class provide strong breakout force, fast cycle times, and excellent maneuverability in busy yard or job site environments.

Wheel loaders in the 190 to 195 horsepower range with 3 cubic yard buckets are well-suited for material loading, stockpiling, and general earthmoving tasks. These machines offer strong breakout force, fast cycle times, and the capacity to handle high-volume material movement across construction, industrial, and utility sites. This class is commonly used for loading trucks, moving aggregate, or clearing debris quickly and efficiently.

Wheel loaders in the 165 to 175 horsepower range with 3 cubic yard buckets are built for high-volume material handling in tough job site conditions. These machines are commonly used for moving sand, gravel, rock, demolition debris, and other loose materials quickly and efficiently across construction, utility, and industrial sites.

Wheeled skid loaders in the 2,300 to 2,900 lb rated operating capacity range are built for medium to heavy-duty work on construction, earthmoving and landscaping projects. These machines offer a strong combination of lifting power and maneuverability for loading, grading, and material transport on active job sites. Typical models in this class feature horsepower between 70 and 85, along with durable frames and fast cycle times for increased productivity.

Wheeled skid loaders in the 1,500 to 2,200 lb rated operating capacity range are ideal for material transport, grading and light site prep in confined areas. Their compact size and tight turning radius make them well-suited for residential construction, landscaping, and utility work where maneuverability is key. This class typically delivers horsepower in the 60–70 hp range, with the lifting capacity and breakout force to handle pallets, soil, aggregate and more.